FECT

Anisotropic Ferrite Magnet

High quality Anisotropic Ferrite Magnet made by cutting.

The main material of the Cutting Magnet is the strontium ferrite magnet, that is made by wet press. Basically, the density in wet press is better than the dry press, so the cutting magnets can achieve a good performance even just a small dimension. The largest of block size for cutting magnet is L220 x W150 x 25.4mmT, and the most common one is L152 x W100 x 25.4mmt(6" x 4" x1"). Presentlly, the smallest size that we are able to make is L2 x W2 x 0.8mmT.
Production Process
Cutting Process:
Block>>Heat>>Glue>>Cutting>>Grind>>Washing>>Magnetization>>Q.C.>>Packing>>Shipping.
Magnetic Characteristic Table

Properties

Residual Flux Density
Br
Coercive Force
bHc
Coercive Force
iHc
Max Energy Products
(BH)max
Remarks
Unit 

 Code

Gauss mT Oe KA/m Oe KA/m MGOe KJ/M3
FE-25 3800 380 1900 152 2100 168 3.00 24.0

Dry/Wet

FE-30 3850 385 2300 184 2350 188 4.30 34.4

Dry/Wet,C5

FE-33 4100 410 2600 208 2660 213 3.80 30.4

Dry

FE-35 4150 415 3000 240 3050 244 4.00 32.0

Wet,FB3N

FE-30BH 3900 390 3000 240 3200 256 4.30 34.4

Wet,C8A

FE-33BH 4000 400 3000 240 3050 244 3.80 30.4

Wet,C8B

FE-35H 3700 370 3300 264 3400 272 3.00 24.0

Wet,FB3G

FE-39H 4000 400 3200 256 3300 264 3.80 30.4

Wet,FB4B

FE-40H 3950 395 3700 296 4000 320 4.00 32.0

Wet

FE-42 4200 420 3300 264 3400 272 4.20 33.6

Wet,FB5B

FE-42HC 4050 405 3700 296 4000 320 4.00 32.0

Wet,FB5H

FE-44 4200 420 3800 304 4000 320 4.20 33.6

Wet,FB6B

FE-46H 4000 400 3800 304 4500 360 3.80 30.4

Wet,FB6H

FE-46HC 3800 380 3600 288 4900 392 4.50 36.0

Wet,FB6E

FE-48 4400 440 4300 344 4500 360 4.90 39.2

Wet,FB9B

FE-50HC 4300 430 4100 328 4900 392 4.00 32.0

Wet,FB9H

Shapes & Magnetic Direction
Application
Sensors
Boxes Holder
Magnetic Holders
Door Catches
Baseball Base
Auto Parts
DIY Parts
Health Therapy
Conveyer Equip
Suptter Elements
Magnetic Instrument
Magnetic Separator
Magnetic Plate
Others
Features
Mold free.
(For arch, segment etc. need to prepare diamond wheel)
By cutting if tooling is impossible.
Largest, Smallest, Thinest, Thickest are available.
Easy magnetization.
Speedy leadtime.
Small quantity available.
Multi-poles magnetization available.
Clean surface.